ZhongLi Tech machine bed processing technology

Laser cutting machine welding bed is the mainstream of the market. 

The welding bed is divided into tube welding and plate welding. Usually 1-6kw is pipe welding, and above 6kw is plate welding. 

The bed of Zhongli Technology 1kw-6kw is welded with large thickness tubes, and there are reinforcing ribs inside, which increases the structural strength and tensile strength of the bed.

The bed is then annealed to relieve welding stress, reduce vibration and prevent the bed from turning.

Finally the bed is finely milled to ensure good cutting accuracy.

1kw is now the smallest power fiber laser cutting machine on the market. Some companies will use the economical cast iron bed to save costs. 

This kind of bed is light in weight and has a high failure rate. When the machine moves, the bed will shake and the cutting accuracy cannot be achieved. 

Our bed is milled twice, greatly increasing the strength. (Ordinary machine tools only grind once)

Generally, after receiving the order, the company needs to hand over the task of manufacturing the bed to the casting company.

Because of environmental protection issues, the casting bed company cannot guarantee the work every day, which will affect the manufacturing time of the bed, 

and the delivery time of a machine mainly depends on the manufacturing time of the bed. 

Our company's bed grinding equipment ensures that our company will deliver the goods within the specified time after receiving the order. 

In addition, the quality and design of the bed is also controlled by our company.